Waterproofing Membranes

Waterproof and seal joints, junctions and general areas on floors and walls.

Coverage

120mm x 50m roll

• TDS

One-pack, waterproofing membrane applied prior to tiling bathrooms & balconies or left exposed on roofs & balconies.

Coverage

Two coats give a final coverage
of 2L/m² (dry film thickness 1.5mm).

• TDS
• SDS
• VOC

Water-based, polyurethane waterproofing membrane.

Coverage

Floors – Apply two wet coats 0.8mm (800μm) to the floor and 100mm up the surrounding walls to obtain a 1mm (1000μm) dry film thickness.

A 15 litre pail covers 10m².

Walls – Apply two wet coats 0.5mm (500μm) to obtain a 0.6mm (600μm) dry film thickness.
A 15 litre pail covers 15m².

• TDS
• SDS
• VOC
• BPIR

Reinforced, brush-applied, waterproofing membrane.

Coverage

Two coats give a final coverage of 2L/m² (dry film thickness of 1.5mm).

• TDS
• SDS
• VOC
• BPIR

Two-pack, fast-drying, microfibre reinforced, waterproofing and anti-fracture/crack bridging membrane.

Coverage

20L/20kg pack covers 14-18m² (2 coats), dry film thickness 1.5mm.

• TDS
• SDS
• VOC
• BPIR

Fast cure, water-based, polyurethane-acrylic, waterproofing membrane.

Coverage

Apply two coats at 0.7mm wet film thickness to achieve a dry film thickness of 1mm. A 15 litre pail covers approximately 10m² (2 coats).

• TDS

A fast cure, easily applied waterproofing system prior to tiling. A waterproofing kit for enclosed shower alcoves. Suitable for use on concrete and compressed cement sheet flooring and walls constructed of brick, block, render, cement sheeting and waterproof gypsum building board.

Contents

• 2 x 4L Liquid Flash 1
• 1L Primebond
• Bond Breaker Tape
• 140mm Reomat
• Brush